Light-flowing, microcrystalline PA66 standard injection moulding grade for short cycle times
Buscador de productos
ASA injection molding grade with high UV resistance, good toughness und heat distorsion temperature
Contact
Solicitar informaciónDescargas
with 30% glass fibres reinforced polyamide 6.6 injection moulding grade, lubricated with PTFE; heat stabilized
Contact
Solicitar informaciónDescargas
heat stabilized, high viscosity, flexible and plasicized PA12 extrusion grade with high UV stability
Contact
Solicitar informaciónDescargas
PP homo injection moulding grade, flame retardant with halogens, 30% glass fibre reinforcement
Contact
Solicitar informaciónDescargas
Acetal Copolymer, standard viscosity, general purpose grade for injection moulding
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on EPDM/PP, easy flowing injection molding grade.
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer - light-flowing injection moulding grade
Contact
Solicitar informaciónDescargas
resistance
Contact
Solicitar informaciónDescargas
50% glass fiber reinforced PPS injection molding grade
Contact
Solicitar informaciónDescargas
High-strength PPS injection moulding grade with 20% carbon fibre reinforcement und very good electrical conductivity
Contact
Solicitar informaciónDescargas
60% glass fibres reinforced and mineral filled injection moulding grade especially for metal replacement applications
Contact
Solicitar informaciónDescargas
with 10% carbon fibres reinforced PPS injection moulding grade
Contact
Solicitar informaciónDescargas
35% glass fibre filled injection moulding grade
Contact
Solicitar informaciónDescargas
PPS injection molding grade with 30% glass fiber reinforcement, lubricated with PTFE
Contact
Solicitar informaciónDescargas
30% glass fibre filled PPS-injection moulding grade, lubricated with PTFE
Contact
Solicitar informaciónDescargas
PA66 injection moulding grade, tribologically modified with 15% PTFE
Contact
Solicitar informaciónDescargas
unreinforced PA12 extrusion grade
Contact
Solicitar informaciónDescargas
unverstärkte, niedrigviskose PA12-Type, geeignet für Folienextrusionsanwendungen mit geringen Schichtdicken
Contact
Solicitar informaciónDescargas
PA66 extrusion grade
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyester-Polyurethane for injection moulding
Contact
Solicitar informaciónDescargas
TPE-S extrustion grade, filled with carbon dust, electrically conductive
Contact
Solicitar informaciónDescargas
PBT standard injection moulding grade, low viskosity, reinforced with 30% glass beads
Contact
Solicitar informaciónDescargas
chemically super impact modified PBT injection moulding grade
Contact
Solicitar informaciónDescargas
PBT injection moulding grade
Contact
Solicitar informaciónDescargas
Injection moulding grade with antistatic properties; Impact modified
Contact
Solicitar informaciónDescargas
stabilised and high impact modification
Contact
Solicitar informaciónDescargas
impact modified polyamide 4.6, injection moulding grade
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
30% glass fibre reinforced LCP injection moulding grade
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
properties, though modified and heat stabilised
Contact
Solicitar informaciónDescargas
heat stabilised, 65% glass fibre reinforced injection moulding grade based on an partially aromatic polyamide-blend; produced without ADN and PA66
Contact
Solicitar informaciónDescargas
40% glass fibers reinforced injection moulding grade based on a polyphtalamide
Contact
Solicitar informaciónDescargas
25% of glass fibre reinforcement, flame retardant Polyamide 6.6 injection moulding grade without halogen, red phosporus and antimony oxid
Contact
Solicitar informaciónDescargas
With 20% glass fibres reinforced injection moulding grade
Contact
Solicitar informaciónDescargas
25% glass fibers reinforced injection moulding grade with superior mechanical properties
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
25% glass fibres reinforced PA12-injection moulding grade, impact modified, with antistatic properties, UV stbilized, easy to colour
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
tough modified, unreinforced and heat stabilized PA12
Contact
Solicitar informaciónDescargas
injection moulding application; excellent mechnical properties; el ectroconductive
Contact
Solicitar informaciónDescargas
Flame-protected injection moulding grade based on a partially aromatic polyphthalamide, with fibre/glass beads reinforcement for optimized shrinkage behaviour
Contact
Solicitar informaciónDescargas
PPS injection molding grade, not reinforced, thermally conductive
Contact
Solicitar informaciónDescargas
with 25% glass fibres reinforced, halogenfree flame retardant PBT injection moulding grade
Contact
Solicitar informaciónDescargas
High performance polymer compound based on polysulfone (PSU) for parts exposed to high temperatures and chemicals
Contact
Solicitar informaciónDescargas
Medium viscosity, 15 % GF reinforced PBT injection moulding grade, impact modified
Contact
Solicitar informaciónDescargas
30% carbon fibers reinforced, heat stabilized injection moulding grade based on a polyphthalamide
Contact
Solicitar informaciónDescargas
Heat-stabilized injection moulding grade based on a partially aromatic polyphthalamide, 40% glass fibre reinforcement
Contact
Solicitar informaciónDescargas
PP Homopolymer, injection molding grade with 50% glass fiber reinforcement
Contact
Solicitar informaciónDescargas
with 40% glass fibres reinforced, heat stabilized polypropylene injection moulding grade
Contact
Solicitar informaciónDescargas
Tough modified, with 20% glass fibre reinforced PA66 injection moulding grade
Contact
Solicitar informaciónDescargas
Heat stabilised PA66 injection moulding grade with good electrical properties, flame retardant without halogens and red phosphorus
Contact
Solicitar informaciónDescargas
Normalviskose Spritzgusstype mit hoher elektrischen Leitfähigkeit
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Halogen- und phosphorfree flame retardet grade
Contact
Solicitar informaciónDescargas
PA510 injection molding grade, biobased, 50% glass fiber reinforcement, heat- and UV stabilized
Contact
Solicitar informaciónDescargas
heat stabilized, 30% glass fibres reinforced injection moulding grade based on polyphtalamide, without ADN, without PA66
Contact
Solicitar informaciónDescargas
with 15% glass fibres reinforced polyetheretherketon injection moulding grade
Contact
Solicitar informaciónDescargas
Amorphous Blend grade based on a polyamide and a PA66 with 15% glass fibre filling
Contact
Solicitar informaciónDescargas
Isotropic, antistatic injection moulding grade based on a PPA and PA66 for warp free and varnished components
Contact
Solicitar informaciónDescargas
halogen and phosphorus-free flame-retarded PA6 injection moulding grade with good flowability
Contact
Solicitar informaciónDescargas
PA6 standard injection moulding grade with higher viscosity, for thick-walled parts, enhanced dry impact resistance
Contact
Solicitar informaciónDescargas
Heat stabilized injection moulding grade on the basis of a partially aromatic polyphthalamide, 30% glass fibre filling
Contact
Solicitar informaciónDescargas
Non-halogen flame-protected, heat stabilized injection moulding grade based on a partially aromatic polyphthalamide; low volatiles
Contact
Solicitar informaciónDescargas
flame retardant, low viscosity PP homopolymer, reinforced with 30% glassfibres <(>&<)> mineral fillers
Contact
Solicitar informaciónDescargas
extrusion and injection moulding grade with a well balanced ratio of mechanical properties and processability
Contact
Solicitar informaciónDescargas
Easy flowing ASA/PC injection moulding grade
Contact
Solicitar informaciónDescargas
ABS/PC-Injection molding grade, very good flow
Contact
Solicitar informaciónDescargas
unreinforced PA12 injection moulding grade, idustrial grade
Contact
Solicitar informaciónDescargas
Unreinforced PA12, injection moulding grade
Contact
Solicitar informaciónDescargas
with 15% glass fibres reinforced, impact modified polyamide 6 injection moulding grade
Contact
Solicitar informaciónDescargas
30% glass fibre and glass bead reinforced injection moulding grade for dimensionally stable technical parts
Contact
Solicitar informaciónDescargas
PA66 injection moulding grade with 30% carbon fibres
Contact
Solicitar informaciónDescargas
ASA injection moulding grade, laser markable
Contact
Solicitar informaciónDescargas
high viscosity PA66 extrusion grade, tribologically modified with 10% carbon fibres and molybdenum disulfide
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 50% glass fibres, UV-stabilised
Contact
Solicitar informaciónDescargas
Injection moulding grade with 30% glass beads for high dimensional stability, impact modified, good mechanical properties
Contact
Solicitar informaciónDescargas
heat stabilised PA4.6 injection moulding grade with 15% glass fibres
Contact
Solicitar informaciónDescargas
ABS/PC injection moulding grade, non-halogen flame retardant, easy flowing, UV-stabilsed
Contact
Solicitar informaciónDescargas
electrically conductive injection moulding PPA-grade
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 20% glass beads for low warpage, heat stabilised, UV stabilised
Contact
Solicitar informaciónDescargas
PP copolymer with 20% glass fibres, heat stabilized, injection moulding grade
Contact
Solicitar informaciónDescargas
easy flowing ABS/PC injection moulding grade
Contact
Solicitar informaciónDescargas
electrically conductive injection moulding PPA-grade
Contact
Solicitar informaciónDescargas
PA6 extrusion grade, halogen free flame retardant, lubrified with molybdenum disulfide
Contact
Solicitar informaciónDescargas
Injection moulding grade; 35% glass fibres; heat stabilised
Contact
Solicitar informaciónDescargas
flame retardant, 30% glass fibre reinforced PBT injection moulding grade, laser markable
Contact
Solicitar informaciónDescargas
heat stabilised PP injection moulding grade with 20% glass fibres and 10% talc
Contact
Solicitar informaciónDescargas
PC injection moulding grade with 30% glass fibres, UV-stabilised, laser markable
Contact
Solicitar informaciónDescargas
unreinforced, halogen free flame retardant PA12 extrusion grade
Contact
Solicitar informaciónDescargas
Easy flowing injection moulding grade; flame retarded with halogens
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
25% glass fibre reinforced injection moulding grade, heat stabilised, for technical applications and electrically isolating parts
Contact
Solicitar informaciónDescargas
Mittelviskose PET Spritzgusstype
Contact
Solicitar informaciónDescargas
PA12 injection molding grade, medium viscosity, 20% glass fiber reinforcement
Contact
Solicitar informaciónDescargas
impact modified PA66 injection moulding grade, 30% glass fibre reinforced
Contact
Solicitar informaciónDescargas
high viscosity PA6 grade for extrusion, heat stabilised
Contact
Solicitar informaciónDescargas
PA66 extrusion grade with 25% glass fibres
Contact
Solicitar informaciónDescargas
Flame retardant PA6 injection moulding grade with 10% carbon fibres, electrically conductive
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Medium viscosity, 30% glass fiber reinforced PBT injection molding grade, flame retarded without halogens
Contact
Solicitar informaciónDescargas
impact modified PA6 injection moulding grade with 30% glass beads
Contact
Solicitar informaciónDescargas
impact modified PA6 injection moulding grade with 15% glass fibres and high UV-resistance
Contact
Solicitar informaciónDescargas
medium viscosity PA12 injection moulding grade, filled with carbon black for a permanent antistatic, improved UV stability
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, 35% glass fiber reinforced, heat stabilized, improved hydrolysis resistance
Contact
Solicitar informaciónDescargas
PBT injection moulding grade with 15% carbon fibres, electrically conductive
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
easy flowing injection moulding grade for thinwalled parts with adverse flow path/wall thickness ratio
Contact
Solicitar informaciónDescargas
Heat stabilised PA6 injetion moulding grade, 30% glass fibres, for technical parts
Contact
Solicitar informaciónDescargas
high viscosity PA6 grade, heat stabilised, suitable for extrusion
Contact
Solicitar informaciónDescargas
injection moulding grade with 10% glass fibres and 20% glass beads for dimensionally stable parts, heat stabilised
Contact
Solicitar informaciónDescargas
heat stabilised PA6 injection moulding grade with 40% glass fibres
Contact
Solicitar informaciónDescargas
PA66 injection moulding grade with 28% glass fibres, flame retardant with red phosphorus, impact modified
Contact
Solicitar informaciónDescargas
Easy-flowing PC/PET alloy for injection moulding; heat and UV-stabilized; impact resistant
Contact
Solicitar informaciónDescargas
20% glass beads reinforced injection moulding grade with superior mechanical properties and high dimensional stability
Contact
Solicitar informaciónDescargas
30% carbon fibre reinforced injection moulding grade, for good friction characteristics, modified with PTFE and silicone oil
Contact
Solicitar informaciónDescargas
low viscosity, flame retardant PBT grade for injection moulding
Contact
Solicitar informaciónDescargas
unreinforced, nucleated PA12 injection moulding grade
Contact
Solicitar informaciónDescargas
30% glass fibre reinforced, heat-stabilized injection moulding grade with antistatic equipment
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with low specific surface resistivity and good electrical conductivity
Contact
Solicitar informaciónDescargas
flame retardant PA66 injection moulding grade with 30% glass fibres
Contact
Solicitar informaciónDescargas
zähmodifizierte Spritzgusstype für technische Bauteile mit sehr guter Kälteschlagzähigkeit
Contact
Solicitar informaciónDescargas
Easy flowing, 25% glass fiber reinforced standard injection molding grade
Contact
Solicitar informaciónDescargas
Polyamide 6 injection moulding grade, reinforced with 20% carbon fibres, antistatic
Contact
Solicitar informaciónDescargas
with 30% glass fibres reinforced blend of PBT and PC, injection moulding grade
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 30% glass beads for low warpage, heat stabilised, UV stabilised
Contact
Solicitar informaciónDescargas
polyamide 66 injection moulding grade, with 35% glass fibres reinforced, halogenfree and without red phosphorus flame retarded
Contact
Solicitar informaciónDescargas
heat and UV stabilized, unreinforced, medium viscosity PA12 grade, good processability, suitable for laser marking
Contact
Solicitar informaciónDescargas
with 15% glass fibres reinforced blend of PBT and PET, injection moulding grade
Contact
Solicitar informaciónDescargas
listed halogenated flame retardant V0 according to RoHS standard
Contact
Solicitar informaciónDescargas
PBT injection moulding grade, reinforced with glass fibres and mineral
Contact
Solicitar informaciónDescargas
Polyamide 66 injection moulding grade with 50% glass fibre reinforcement for mechanically and thermally stressed parts
Contact
Solicitar informaciónDescargas
50% glass fibres reinforced, dry impact resistent polyamide 6 injection moulding grade
Contact
Solicitar informaciónDescargas
25% glass fibres reinforced, high heat stabilized PA66 injection moulding grade
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, filled with 30% glass beads, for dimensionally stable parts with low warpage; flame retardet
Contact
Solicitar informaciónDescargas
25% glass fibres reinforced, heat stabilised injection moulding grade
Contact
Solicitar informaciónDescargas
injection moulding grade based on partial aromatic polyamide
Contact
Solicitar informaciónDescargas
Non-halogen flame-protected, glass fibre and mineral reinforced injection moulding type with excellent mechanical characteristics
Contact
Solicitar informaciónDescargas
Easy flowing, 30% glass fiber reinforced PA6 injection moulding grade, heat stabilised
Contact
Solicitar informaciónDescargas
ABS/PC-Injection molding grade, very good flow
Contact
Solicitar informaciónDescargas
with 10% glass fibres reinforced, easy flowing PA6 standard injection moulding grade
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Medium viscosity PBT injection molding grade, easy processing
Contact
Solicitar informaciónDescargas
Heat stabilized PA66 standard injection moulding grade with 50% glas fibres filled
Contact
Solicitar informaciónDescargas
Easy-flowing, dry impact resistant injection moulding grade
Contact
Solicitar informaciónDescargas
Medium viscosity PA6 injection molding grade, lubricated with molybdenium disulfide, good wear resistance
Contact
Solicitar informaciónDescargas
dry impact modified, easy flowing injection moulding grade based on PA6, optimized mould release
Contact
Solicitar informaciónDescargas
Easy flowing injection moulding grade; flame retarded with halogens
Contact
Solicitar informaciónDescargas
Easy flowing, 35% glass fibre reinforced standard injection moulding grade
Contact
Solicitar informaciónDescargas
Halogen free flame retardant, 45% glass fibres/mineral reinforced injection moulding grade with superior mechanical properties
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 20% glass beads for low warpage
Contact
Solicitar informaciónDescargas
impact modified PA6 injection moulding grade with 35% glass fibres
Contact
Solicitar informaciónDescargas
chemically impact modified, glass fibres reinforced PA6 injection moulding grade
Contact
Solicitar informaciónDescargas
Medium viscosity PA66 injection molding grade, lubricated with molybdenium disulfide, good wear resistance
Contact
Solicitar informaciónDescargas
ASA/PC injection molding grade, high impact strength
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Easy flowing ABS+PC injection molding grade, flame retarded without halogens
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade; flame retarded without halogens and red phosphorous, with superior flow behaviour and electrical properties
Contact
Solicitar informaciónDescargas
PA6 injection molding grade, 30% glass fiber and glass beads reinforcement for high dimensional stability, heat stabilized based on copper components
Contact
Solicitar informaciónDescargas
Easy flowing PPA+PA66 alloy, injection molding grade, transparent
Contact
Solicitar informaciónDescargas
Easy flowing ABS+PA blend, impact modified, 8% glass fiber reinforcement
Contact
Solicitar informaciónDescargas
PA12 injection molding grade filled with 10% glass beads.
Contact
Solicitar informaciónDescargas
Easy flowing ABS injection moulding grade filled with 10% glass fibers
Contact
Solicitar informaciónDescargas
Easy flowing ABS injection moulding grade filled with 10% glass beads
Contact
Solicitar informaciónDescargas
PA6 injection molding grade with 15% natural fiber reinforcement, flame retarded without halogens, for flame resistant housings and coverings
Contact
Solicitar informaciónDescargas
Easy flowing PA12 injection molding grade, 8% carbon fiber reinforcement, antistatic
Contact
Solicitar informaciónDescargas
30% carbon fiber reinforced injection molding grade based on a blend of polyamide and PPA, heat stabilized
Contact
Solicitar informaciónDescargas
Easy flowing ABS/PC injection molding grade, UV stabilized, antistatic
Contact
Solicitar informaciónDescargas
PA612 injection molding grade, filled with 40% glass fiber and milled glass , impact modified, UV stabilized
Contact
Solicitar informaciónDescargas
PPS injection molding grade, 45% glass fiber reinforcement
Contact
Solicitar informaciónDescargas
Compound with higher viscosity based on PP-copolymer; flame retarded without halogens; for extrusion and injection molding
Contact
Solicitar informaciónDescargas
20% glass fibre reinforced, heat stabilized PA12-injection moulding grade; impact resistant modified
Contact
Solicitar informaciónDescargas
30% glass fiber reinforced PA6 injection molding grade, high strength, suitable for laser marking
Contact
Solicitar informaciónDescargas
30% glass fiber reinforced PA6 injection molding grade, high strength, suitable for laser marking
Contact
Solicitar informaciónDescargas
PA6 injection molding grade, 40% glass fiber reinforcement, impact modified, heat- and UV stabilized, laser markable
Contact
Solicitar informaciónDescargas
Injection moulding grade based on a partially aromatic polyphthalamide with 40% glass fibre reinforcement, tribologically modified, heat stabilized
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, 30% glass fibers, heat stabilized, optimized for laser marking
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, 30% glass fibers, heat stabilized, optimized for laser marking
Contact
Solicitar informaciónDescargas
Polypropylene homopolymer injection moulding grade with 20% glass fibre reinforcement
Contact
Solicitar informaciónDescargas
Higher viscosity, with 30% glass beads reinforced injection moulding grade
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
unreinfoced PA612 for injection moulding and extrusion applications
Contact
Solicitar informaciónDescargas
Easy flowing ASA/PC injection molding grade, heat and UV stabilized, permanently antistatic
Contact
Solicitar informaciónDescargas
PP Copolymer, high toughness, for injection molding, extrusion and blow molding
Contact
Solicitar informaciónDescargas
Heat stabilized and impact modified 15% glass fibre filled injection moulding grade for parts with snap-fit connectors
Contact
Solicitar informaciónDescargas
PPA injection moulding grade with 35% glass fibres, heat stabilised
Contact
Solicitar informaciónDescargas
Easy flowing PA6 injection molding grade, reinforced with 15% glass fibers and 15% glass bubbles
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, 30% glass fiber reinforcement, heat and UV stabilized
Contact
Solicitar informaciónDescargas
ASA/PC injection molding grade, high impact strength, heat- and UV stabilized
Contact
Solicitar informaciónDescargas
ABS/PC injection molding grade with 30% glass fiber reinforcement, heat and UV stabilized
Contact
Solicitar informaciónDescargas
50% glass fibres reinforced injection moulding grade with high strength, heat- and UV stabilized, suitable for laser marking
Contact
Solicitar informaciónDescargas
with 10% glass fibres and 20% minerals reinforced polyamide 6 injection moulding grade
Contact
Solicitar informaciónDescargas
heatstabilized injection moulding grade basen on PPA and PA66, reinforced with 30% glass fibres
Contact
Solicitar informaciónDescargas
Laser markable PA66 injection moulding grade with 35% glass fibres
Contact
Solicitar informaciónDescargas
Easy flowing PA6 injection molding grade, 15% glass fiber reinforcement, flame retarded without halogens, laser markable
Contact
Solicitar informaciónDescargas
PA66 injection molding grade, heat stabilized, filled with 30% glass beads, for dimensionally stable parts with low warpage
Contact
Solicitar informaciónDescargas
sehr leichtfließende Spritzgusstype für dünnwandige Bauteile mit geringen Wanddicken
Contact
Solicitar informaciónDescargas
PA4.6 injection moulding grade with 50% glass fibres
Contact
Solicitar informaciónDescargas
dry impact modified PA6 injection moulding grade with reduced shrinkage
Contact
Solicitar informaciónDescargas
35% glas fibre reinforced, standard injection moulding grade with outstanding mechanical properties
Contact
Solicitar informaciónDescargas
easy flowing, Polyamide 6 injection moulding grade for short cycle times
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 30% glass fibres, UV-stabilised
Contact
Solicitar informaciónDescargas
high viscosity PA6 grade, nucleated, suitable for injection moulding or extrusion
Contact
Solicitar informaciónDescargas
heat stabilised, 30% glass fiber reinforced PA66 injection moulding grade, very good mechanical properties
Contact
Solicitar informaciónDescargas
PA6-injection moulding grade, dry impact resistance
Contact
Solicitar informaciónDescargas
PBT injection moulding grade, 10% glass fibre reinforcement, medium viscosity
Contact
Solicitar informaciónDescargas
25% glass fibre reinforced PA66 injection moulding grade
Contact
Solicitar informaciónDescargas
chemically impact modified injection moulding grade, super tough
Contact
Solicitar informaciónDescargas
Halogen free flame retardant, 60% glass fibres/mineral reinforced injection moulding grade with superior mechanical properties
Contact
Solicitar informaciónDescargas
30% mineral filled injection moulding grade for technical parts with good dimensional stability
Contact
Solicitar informaciónDescargas
30% glass fibres reinforced injection moulding grade for parts with high stiffness and for electrically isolating products
Contact
Solicitar informaciónDescargas
30% glass fibres reinforced injection moulding grade for technical and electrically isolating products
Contact
Solicitar informaciónDescargas
Easy- flowing injection moulding grade; heat stabilised; for technical applications
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with high impact modification
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade, reinforced with 15% glass fibres
Contact
Solicitar informaciónDescargas
high viscosity injection moulding grade based on PA6
Contact
Solicitar informaciónDescargas
Easy flowing injection moulding grade for short cycle times, lubricated with MoS2, high wear resistance
Contact
Solicitar informaciónDescargas
Heat aging stabilised, easy flowing nylon 66 injection moulding grade for technical parts
Contact
Solicitar informaciónDescargas
Halogen free flame retardant, 35% glass fibres and mineral reinforced injection moulding grade with superior mechanical properties
Contact
Solicitar informaciónDescargas
Tough modified injection moulding grade with 30% glass fibres for technical applications
Contact
Solicitar informaciónDescargas
Injection moulding grade with 35% glass fibres; for technical applications
Contact
Solicitar informaciónDescargas
Impact modified 30% glass fibres reinforced injection moulding grade
Contact
Solicitar informaciónDescargas
easy flowing injection moulding grade with good impact properties
Contact
Solicitar informaciónDescargas
30% glass fibre reinforced, heat aging stabilised injection moulding grade with high stiffness
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 25% glass fibres, suitable for the production of technical parts and electrically insulating parts
Contact
Solicitar informaciónDescargas
50% glass fibres reinforced injection moulding grade, heat stabilized, for technical products with high thermal resistance and high stiffness
Contact
Solicitar informaciónDescargas
Easy flowing, medium viscosity injection moulding grade
Contact
Solicitar informaciónDescargas
medium viscosity injection moulding grade based on PET, reinforced with 35% glass fibres
Contact
Solicitar informaciónDescargas
flame retardant PBT injection moulding grade with good mechanical properties, medium viscosity
Contact
Solicitar informaciónDescargas
PBT standard injection moulding grade, medium viskosity, reinforced with 30% glass beads
Contact
Solicitar informaciónDescargas
High viscosity, 30% glass fibres reinforced injection moulding grade, suitable for drinking water applications according to DVGW W270
Contact
Solicitar informaciónDescargas
PA12 injection molding grade, 50% glass fiber reinforcement, impact modified
Contact
Solicitar informaciónDescargas
PA66 injection molding grade with 30% glass beads reinforcement, for dimensionally stable articles with low warpage
Contact
Solicitar informaciónDescargas
15% glass fibre reinforced PA12 injection moulding grade, heat stabilised
Contact
Solicitar informaciónDescargas
30% glass beads reinforced, heatstabilized polyamide 12 injection moulding grade
Contact
Solicitar informaciónDescargas
30% glass fibre reinforced PA12 injection moulding grade, UV stabilised
Contact
Solicitar informaciónDescargas
15% glass fibre reinforced PA12 injection moulding grade; heat stabilized
Contact
Solicitar informaciónDescargas
Easy flowing injection moulding grade for thin walled products
Contact
Solicitar informaciónDescargas
For injection moulding and extrusion, with high toughness, strength and stiffness as well as low water uptake; Heat stabilzed
Contact
Solicitar informaciónDescargas
50% glass fibres reinforced injection moulding grade with superior mechanical properties, high dimensional stability
Contact
Solicitar informaciónDescargas
Impact resistant modified, flame-protected injection moulding grade for thin-walled components with different flowpath-wall section ratios
Contact
Solicitar informaciónDescargas
Mineral-filled, lubricated injection moulding grade, reinforced with glass fibres
Contact
Solicitar informaciónDescargas
PA66/6 injection moulding grade with 10% glass fibre reinforcement, impact resistant modified and flame-protected
Contact
Solicitar informaciónDescargas
heat stabilised PA66 injection moulding grade, highly impact modified
Contact
Solicitar informaciónDescargas
Impact modified PA66 injection moulding grade for parts and housings with superior cold impact behaviour
Contact
Solicitar informaciónDescargas
Medium viscosity PA66 injection molding grade for thin-walled parts, very good mechanical properties
Contact
Solicitar informaciónDescargas
heatstabilized, with 35% glass fibres reinforced polyamide 66 injection moulding grade
Contact
Solicitar informaciónDescargas
Injection moulding grade based on polyamide 6 with 35% glass fibre reinforcement; impact resistant modified
Contact
Solicitar informaciónDescargas
Easy flowing PA6 injection molding grade, flame retarded without halogens
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade; flame retardant (free from halogens and red phosphorous) with superior flow behaviour and electrical properties
Contact
Solicitar informaciónDescargas
with 30% Glassfibres reinforced PA6 injection moulding grade, dry impact modified
Contact
Solicitar informaciónDescargas
10% glass fibres reinforced injection moulding grade for engineering products that require high toughness and stiffness
Contact
Solicitar informaciónDescargas
PA6 injection molding grade, 30% glass fiber reinforced, improved heat stabilization
Contact
Solicitar informaciónDescargas
low viscosity PA6 injection moulding grade, heat stabilised
Contact
Solicitar informaciónDescargas
Injection moulding grade based on PA6 with 40% glass reinforcement
Contact
Solicitar informaciónDescargas
impact-modified injection moulding grade
Contact
Solicitar informaciónDescargas
Injection moulding grade filled with 30% glass beads for the production of dimensionally stable components with low warpage; flame-protected
Contact
Solicitar informaciónDescargas
heatstabilised PA6 injection moulding grade, filled with 30% glass beads for dimensionally stable parts with low warpage
Contact
Solicitar informaciónDescargas
Polyamide 6 injection moulding grade
Contact
Solicitar informaciónDescargas
40% glass fibre reinforced injection moulding grade with high stability
Contact
Solicitar informaciónDescargas
with 30% glassfibres reinforced, impact modified polyamide 6 injection moulding grade
Contact
Solicitar informaciónDescargas
PA6 injection molding grade, 30% glass fiber reinforcement, optimized flow properties
Contact
Solicitar informaciónDescargas
Polyamide 6 injection moulding standard grade with 30% of glass fibre reinforcement
Contact
Solicitar informaciónDescargas
PA6 injection molding grade, 30% glass fiber reinforced, laser transparent
Contact
Solicitar informaciónDescargas
PA6 injection moulding grade with 30% glass fibre reinforcement, flame retardant, halogen free
Contact
Solicitar informaciónDescargas
20% glass fibres reinforced PA6 injection moulding grade with halogenfree and red phosphorus free flame retardant, laser markable
Contact
Solicitar informaciónDescargas
Halogen and red phosphorous free flame retardant injection moulding grade with superior flow behaviour and good electrical properties
Contact
Solicitar informaciónDescargas
Thermoplastic Polyester-Polyurethane, easy to color
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyurethane; FDA-conform; suitable for injection moulding and extrusion
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyether-Polyurethane, injection moulding grade with antistatic properties
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on polyurethane; antistatic
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyester-Polyurethane; 20% glass beads filled injection molding grade
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
extrusion grade with low density and optimized compression set
Contact
Solicitar informaciónDescargas
high viscosity injection moulding grade based on SEBS
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer compound based on SEBS; injection moulding grade, for ABS and ABS/PC overmolding. heat and UV stabilized
Contact
Solicitar informaciónDescargas
Easy flowing injection molding grade based on SEBS, low density, for PE overmolding
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer compound based on SEBS; injection moulding grade, for POM overmolding
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, injection molding grade, for overmolding of ABS, ABS/PC, ASA, ASA/PC
Contact
Solicitar informaciónDescargas
TPE-S Spritzgusstype mit ausgewogenem Eigenschaftsprofil
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyester, halogenfree flame retardant material
Contact
Solicitar informaciónDescargas
Injection moulding grade with improved surface properties
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, for overmolding of ABS, ASA and corresponding PC compounds, UV stabilized
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, easy flowing injection molding grade, UV stabilized
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS, low viscosity injection moulding grade, low density
Contact
Solicitar informaciónDescargas
TPE-S injection moulding grade based on SEBS, low density, UV-stabilised
Contact
Solicitar informaciónDescargas
extrusion quality
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, easy flowing injection molding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, for polyester overmolding
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, for polyamide overmolding
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, injection molding grade, for polyamide overmolding
Contact
Solicitar informaciónDescargas
easy flowing injection moulding grade based on SEBS, low density
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, easy flowing injection molding grade, low density
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS; injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, injection molding grade, suitable for PA6 and PA6-GF overmolding
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on Polyester, halogen free flame retardent material, V-0 at 1.5mm
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS, adhesion modification for ABS and PC
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, injection molding grade, industrial quality
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS, adhesion modified for PP
Contact
Solicitar informaciónDescargas
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer-Compound based on SBS; injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer compound based on SEBS, injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer compound with excellent flowabilty for injection moulding
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, with antistatic characteristics
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, injection moulding grade, adhesion modified for overmoulding PA
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS, injection moulding grade
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS (TPS, TPE-SEBS)
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer based on SEBS for injection moulding
Contact
Solicitar informaciónDescargas
easy flowing injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, easy flowing injection moulding grade
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, injection molding grade with good flowing properties
Contact
Solicitar informaciónDescargas
Thermoplastic Elastomer with low density and low odour; injection moulding grade for automotive interieur applications
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, for ABS, ABS/PC, ASA, ASA/PC overnolding
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS
Contact
Solicitar informaciónDescargas
thermoplastic elastomer based on SEBS with low density and low compression set
Contact
Solicitar informaciónDescargas
Thermoplastic elastomer based on SEBS, easy flowing injection molding grade, flame retarded with halogen compounds
Contact
Solicitar informaciónDescargas
Easy flowing TPE-S grade with improved wear behaviour
Contact
Solicitar informaciónDescargas
TPE-S injection moulding grade based on SEBS, good compression set, UV-stabilised
Contact
Solicitar informaciónDescargas
easy flowing standard injection moulding grade, easy to color
Contact
Solicitar informaciónDescargas
leichtfliessendes Thermoplastisches Elastomer auf Basis SEBS mit verbessertem DVR