Badalac Blends - Специальные компаунды и смеси по желанию клиента!
Components made of thermoplastics are required to fulfil high demands. Often these requirements are so specific that they cannot be met by just one type of plastic. In such cases Bada AG’s polymer concept is the effective solution.
Blending with PC or PA can substantially enhance the properties of ABS and ASA. Compared to pure ABS and ASA compounds, ABS/PC and ASA/PC blends show increased impact resistance and enhanced dimensional stability under heat. Blending with PA lends ABS or ASA some of the favourable characteristics of polyamides such as matt surfaces, excellent rigidity, and dimensional stability.
Customized modifications of these blends, e.g. with fillers, modified impact resistance, or individual colouring are available on request even in small batches.
ABS/PC-Injection molding grade, very good flow and high impact strength
easy flowing ABS/PC injection moulding grade
ABS/PC-Injection molding grade, very good flow, lubricated with MoS2
Injection moulding grade with 10% glass fibers, heat stabilized, UV-stabilized
Injection moulding grade with 20% glass fibers, heat stabilized, UV-stabilized
ABS/PC-Injection molding grade, non-halogen flame-protected, very good flow
UV-stabilized ASA/PC-extrusion grade with good impact strength
ASA/PC injection molding grade with high toughness, heat- and UV stabilized, for automotive interior
non-halogen flame-protected ASA/PC-Injection molding grade with heat and UV stabilization
easy-flowing ABS and PA Blend, impact resistant modified
Easy flowing ABS/PA blend for matt surfaces, UV stabilized
injection moulding grade with 8% glass fibre reinforcement and UV-stabilisation
Flame-protected ABS/PA-Blend with 15% glass fibre reinforcement, UV-stabilized, injection mouding quality
ABS/PA Blend with 20% glass fibre reinforcement, UV-stabilized
injection moulding grade with 30% glass fibre reinforcement and UV-stabilisation
Highly impact modified ABS+PA alloy, excellent flow properties
ASA+PA alloy, easy flowing injection molding grade, impact modified
Easy flowing ASA+PA alloy, impact modified, 10% mineral filler, UV stabilized